home

Battery Lights/Blinkers Spark plugs Cooling system Ignitions Transmission Audio Wiring Alternator Alarms

ask about cars

  

dictionary

   

 

:: Maintenance ::

   Flush radiator and replacing the fluids
     Every two years, make sure you flush your radiator and when replacing the fluids; be sure to use a proper mixture of antifreeze and water.

   How to check hoses

 

   Check the hoses by turning on the engine and the heater for ten minutes. If the hoses still feel cool, they may be clogged.

   How to check if the thermostat is working properly
    You can check if your thermostat is working ok by turning on your engine for 10-15 minutes and seeing if you can feel warm coolant running through the upper hose. If you feel the coolant, the thermostat is working fine.
    :: Water Pump Failure  ::

   When to replace hoses
    Replace your hoses if any of them feel swollen or soft. This usually indicates that the material has started to deteriorate.

   Pump seal problems
  One cause of your pump seal swelling or cracking is the addition of too little water in the antifreeze water mix.